| D40Q | 4 x 1000W 4 ohms |
| D40QDSP | 4 x 1000W 4 ohms (with DSP) |
| D80Q | 4 x 2000W 4 ohm |
| D80Q-DSP | 4 x 2000W 4 ohm (with DSP) |
| D100Q | 4 x 2700W 4 ohms |
| D100Q-DSP | 4 x 2700W 4 ohms (with DSP) |
| D120 | 2 x 4600W 4 ohms |
Output Power (per channel):
| D40Q | D80Q | D100Q | D120 | ||
| 8R | 500W x 4 | 1000W x 4 | 1400W x 4 | 2400W x 2 | |
| 4R | 1000W x 4 | 2000W x 4 | 2700W x 4 | 4600W x 2 | |
| 2.7R | 1400W x 4 | 2200W x 4 | 3700W x 4 | 6250W x 2 | |
| 2R | 1200W x 4 | 2000W x 4 | 3500W x 4 | 6800W x 2 |
Output Power (bridged):
| D40Q | D80Q | D100Q | D120 | ||
| 8R | 2000W x 2 | 4000W x 2 | 5600 x 2 | — | |
| 4R | 2400W x 2 | 4000W x 2 | 7000W x 2 | — |
Powers measured for continuous music with Crest Factor of 4.8 (14dB)
2.7 Ohm power quoted for highest single ended output and greatest efficiency (3 x 8 ohm parallel drivers).
Amplifier is stable with 2 ohm loads but output will be reduced.
Processing:
ADC and DAC resolution: 24bit
Internal sample rate: 96kHz
System:
Nominal system gain: 32dB
Mains voltage: 115/230VAC nominal 50-60Hz
(factory set for either 115 or 230V operation)
Mains current: 20A maximum
Suggested circuit breaker: C32
Mains connector: PowerCon
Physical:
Dimensions: 88 x 482 x 458mm (HxWxD)
Weight:
D100Q-DSP: 12.5kg (27.6lbs), Boxed (shipping) 14.5kg (32.0lbs)
D80Q-DSP: 11.0kg (24.2lbs), Boxed (shipping) 13.0kg (28.7lbs)
D40Q-DSP: 10.0kg (22.0lbs), Boxed (shipping) 12.0kg (26.5lbs)
D100Q: 12.5kg (27.6lbs), Boxed 14.5kg (32.0lbs)
D80Q: 11.0kg (24.2lbs), Boxed 13.0kg (28.7lbs)
D40Q: 10.0kg (22.0lbs), Boxed 12.0kg (26.5lbs)
D120: 12.25kg (27.0lbs), Boxed 14.25kg (31.4lbs)






