Source
• Light source type: 1x 60W RGBW and 18 x 40W RGBW LED multichips
• LED life expectancy: min. 50.000 hours
• Typical lumen maintenance: L70/B50 @ 50.000 hours
Optical system
• Robe’s proprietary optical design
• High-efficiency zoom optical system, ratio 12,5:1
• Zoom range: 4° – 50°
• Fixture total lumen output:
• 13 100 lm (integrating sphere)
• 10.500 lm (goniophotometer)
• Illuminance: 49.000 lx @ 5 m
• RLCT™ Innovative lens coating technology
• EasyClean™ – newly designed and patented lens sandwich system for easy cleaning and time saving maintenance of the lenses
Dynamic Effects and Features
• Colour mixing mode RGBW or CMY
• Individual control of each RGBW pixel
• White light: Variable CCT 2.700K – 8.000K
• DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
• Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4.200K (red shift and thermal delay)
• Colour rainbow effect with variable speed
• MCFE™ – Multi-Coloured Flower Effects – creating spectacular multicolour beam effects in the air rotating in both directions at variable speed (Patented)
• Pre-programmed pixel effects with colour, dimming and strobe chases, waves and pulses at variable speed and direction
• Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects
• High resolution electronic dimming: 0 – 100%
• L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
• Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
• POLAR+™ for power saving and instant operation in extremely cold weather conditions
Control and programming
• Setting & Addressing: ROBE Navigation System 3 (RNS3)
• Display: QVGA Robe screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, built-in analyser for easy fault finding, NFC app controller
• Protocols: USITT DMX-512, RDM, Art-Net, MA Net, MA Net2, sACN, Kling-Net
• Wireless CRMX™ technology from Lumen Radio
• Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity
• REAP™ – Robe Ethernet Access Portal
• RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance
• DMX Protocol modes: 10
• Control channels: 49, 27, 33, 90, 27, 47, 91, 110, 104, 123
• Pan & Tilt resolution: 16 bit
• R,G,B,W colour mixing: 8 or 16 bit (internal 18 bit)
• Zoom: 8 bit
• Dimmer: 8 or 16 bit (internal 18 bit)
Movement
• Pan movement: 540°
• Tilt movement: 220°
• Movement control: Standard and Speed
• Controllable speed of Pan & Tilt movement
• EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)
• Automatic Pan & Tilt position correction
Electrical specification and connections
• Power supply: Electronic auto-ranging
• Input voltage range: 100-240 V, 50/60 Hz
• Power consumption: max. 660 W
• Power connector in: IP65 Neutrik powerCON TRUE1
• DMX and RDM data in/out: IP65 Locking 5-pin XLR connectors
• Embedded Ethernet switch 10/100 Mbps: 1 x in / 1 x out
• Ethernet port in: 2 x IP65 RJ45 connector
