Source
• Light source type: MSL-TE™ 350W LED Engine (Patented)
• LED Engine output: 16.700 lm
• LED life expectancy: min. 40.000 hours
• Colour rendition: CRI: 95, CRI R9: 96, TM30-18 Rf: 92, TM30-18 Rg: 106, TLCI: 91
• Typical lumen maintenance: L70/B50 @ 40.000 hours
• Light source warranty: 4 years or 20.000 hours
Optical system
• Robe’s proprietary optical design
• Profile zoom lens system
• High-efficiency zoom optical system, ratio 7.2:1
• Zoom range: 10° – 72°
• Fixture total lumen output:
11.960 lm (integrating sphere)
9.566 lm (goniophotometer)
• Output lens diameter: 200 mm
• Optional PC and Fresnel zoom lens systems
Main features
• Colour mixing: CMY/RGB or RGBAL
• White light: Variable CCT standard range 2.700K – 8.000K, extended range 1.800K – 10.000K
• DataSwatch™ filters: pre-programmed 237 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K
• Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 2.700K to 4200K (red shift and thermal delay)
• + – Green correction function
• Adjustable CRI: from 80 to 95+
• Motorised zoom
• Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects
• High resolution electronic dimming: 0 – 100%
• L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
• Dimmer profile selection: Linear, Square law, Super Square law
• Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
• Extremely quiet operation suitable for all types of production in Theatre and TV
• AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.
• BARS™ – Brake Attribute Retention System (Patented) applied for Zoom stepper motors
• ZoomStat™ – Patented zoom system that incorporates a stationary front Fresnel or PC lens, boasting an impressively wide beam angle exceeding 70°
• FadeSync™ – Motorized Fader Synchronisation
Control and programming
• Setting & Addressing: ROBE Navigation System 2 (RNS2)
• Display: two-row LCD display & 4 control buttons
• Protocols:
USITT DMX-512, RDM
ArtNet, MA Net, MA Net2, sACN
• REAP™ – Robe Ethernet Access Portal
• Wireless CRMX™ technology from Lumen Radio – on request
• Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity – on request
• DMX Protocol modes: 6
• Control channels: 20, 10, 24, 7, 2, 1
Electrical specification and connections
• Power supply: Electronic auto-ranging
• Input voltage range: 100-240 V, 50/60 Hz
• Power consumption: Max. 440 W
• Power connector in/out: Neutrik powerCON TRUE1 in/out
• DMX and RDM data in/out: Locking 5-pin XLR
• Ethernet port in: RJ45
• Ethernet port in/out: RJ45 for Embedded Epass™ switch 10/100 Mbps – on request













