Source
• Light source type: iSE-TE™ 1.000W HP White LED Engine (Patented)
XP – Xtra Performance Engine for maximum light output and optimal colour characteristics
LED Engine output: 92.000 lm
Fixture total lumen output:
– 55.000 lm (integrating sphere)
– 43.800 lm (goniophotometer)
Colour temperature output: 6.700 K
CRI: 70, remotely selectable filters for CRI 80 and CRI 90
Illuminance: 355.000 lx @ 5 m
• Light source type: iSE-TE™ 1.000W HCF White LED Engine (Patented)
HCF – High Colour Fidelity Engine for the best light quality and colour rendition
LED Engine output: 55.000 lm
Fixture total lumen output:
– 37.000 lm (integrating sphere)
– 28.000 lm (goniophotometer)
Colour temperature output: 6.000K
CRI: 96, TLCI: 97, TM-30-18 Rf: 92, TM-30-18 Rg: 99
Illuminance: 231.000 lx @ 5 m
• LED life expectancy: min. 50.000 hours
• Typical lumen maintenance: L70/B50 @ 50.000 hours
• Light source warranty: 4 years or 20.000 hours
Optical system
• Robe’s proprietary optical design
• High-efficiency 13-lens zoom optical system, ratio: 15:1
• Zoom range:
3.5° – 52° (standard optical range)
2.0° – 52° (using optical zoom + iris)
0.7° – 2° (long-throw mode)
• Output lens diameter: 180 mm
Dynamic Effects and Features
• Cyan: 0 – 100%
• Magenta: 0 – 100%
• Yellow: 0 – 100%
• Variable CTO: 3.000K – 6.700K
• ChromaTint™ – Patented plus / minus green correction function
• Colour Wheel 1: 5 fixed dichroic colours+ white
• Colour Wheel 2: 5 fixed dichroic colours + white
• Framing shutters: Patented Plano4™ framing shutters module with 4 individually positionable blades plus rotation of the complete frame system + – 60°
• Rotating gobo wheel 1: 5 rotating, indexable and replaceable breakup and aerial gobos + open, patented slot & lock system
• Animation wheel: 2 Aluminium animation wheels, used alone or in combination with gobos, rotating in both directions at variable speed
• Prism 1: Independent 6 facet linear prism rotating in both directions at variable speed
• Prism 2: Independent 6 facet circular prism rotating in both directions at variable speed
• Frosts: MagFrost™ – magnetic paddle fast change system providing exchangeable frosts containing as standard a very light 1° for instant softening of the projected gobo or framing shutters, and 5° for even wash, both specifically selected for theatre and TV use
• Iris: Motorized, stepless, pulse effects up to 3 Hz
• XR7™ eXtreme Reach Follow Spot technology enables you to achieve unprecedented light levels, even the narrowest beam angle of 0.7 degrees
• Motorized zoom and focus
• Electronic strobe effect with variable speed up to 20 Hz, pre-programmed random strobe & pulse effects
• High resolution electronic dimming: 0 – 100%
• L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
• Extremely quiet operation suitable for all types of production in Theatre and TV
• Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
• AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.
• POLAR+™ for power saving and instant operation in extremely cold weather conditions
• CamFit™ Prewired for later camera installation
Control and programming
• Setting & Addressing: ROBE Navigation System 2 (RNS2)
• Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operationmemory service log with RTC, stand-alone operation with 2 editable programs (each up to 80 steps), built-in analyser for easy fault finding, NFC app controller
• Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
• REAP™ – Robe Ethernet Access Portal
• Wireless CRMX™ technology from Lumen Radio
• Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity
• RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance
• DMX Protocol modes: 1
• Control channels: 54
Movement
• Pan movement: 540°
• Tilt movement: 270°
• Movement control: Standard and Speed
• Controllable speed of Pan & Tilt movement
• EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patented)
• Automatic Pan & Tilt position correction
• MAPS™ – Motionless absolute positioning system for Pan and Tilt (Patented)
Rotating gobos
• 5x rotating glass gobos
• Outside diameter: 30.8 mm
• Image diameter: 25.0 mm
• Thickness: 1.1 mm
• Max. thickness: 3.5 mm
• High temperature borofloat or better glass
• Patented slot & lock system for easy replacement of gobos
Effect wheel
• Dual animation wheel
• Material: Aluminium
• Diameter: 112 mm
• Can be used alone or in combination with rotating gobos
• Rotating in both directions at variable speed
Framing shutters system
• Shutters: 4 Blades, each with separate movement and +- 25° rotation control
• Movement: Smooth with variable speed, ultra-fast for creating mid-air effects
• Rotation: +- 60° of the complete framing system
Electrical specification and connections
• Power supply: Electronic auto-ranging
• Input voltage range: 100-240 V, 50/60 Hz
• Power consumption: max. 1250 W
• Power connector in: IP65 Neutrik powerCON TRUE1
• DMX and RDM data in/out: IP65 Locking 3-pin & 5-pin XLR connectors
• Ethernet port out: RJ45 – camera video output
• Ethernet port in/out: IP65 RJ45, for Embedded Epass™ switch 10/100 Mbps
• USB connector (series C) for lightmaster purposes
