SPECIFICATIONS
| Loudspeaker Technical Specifications | |
|---|---|
| Acoustic Performance | |
| Frequency Response (-10 dB) | 50 Hz – 20 kHz |
| Frequency Response (-3 dB) | 57 Hz – 20 kHz |
| Horizontal Coverage | 90° |
| Vertical Coverage | 60° |
| Maximum SPL Peak | 115 dB |
| Monitor Angle | 45° |
| Transducers | |
| Low Frequency | 8 in / 203 mm with ferrite |
| High Frequency | 1.0 in / 25 mm polymer compression driver |
| Power Amplifiers | |
| System Power Amplification – Rated Power | 200 watts peak |
| Low Frequency Power Amplifier | Rated Power: 175 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| High Frequency Power Amplifier | Rated Power: 25 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| System Processing | |
| Voicing | Four speaker modes |
| Input / Output | |
| Input Type | 2x Female XLR & 1/4″ Balanced TRS combo jack • 1/8″ TRS • Bluetooth |
| Mic-Line Impedance | 20 kΩ balanced |
| 1/4″ TRS / XLR Impedance | 20 kΩ balanced |
| Output Type | Male XLR Balanced [Thru] |
| Thru Impedance | 150 Ω balanced |
| Bluetooth Information | |
| Bluetooth Protocol | 5.0 |
| Bluetooth Function | Audio Streaming and User Interface Control |
| Electronic Crossover | |
| Crossover Type | 24 dB / octave |
| Crossover Frequency | 2.2 kHz |
| Line Input Power | |
| Detachable line cord | 100 – 240 VAC, 50 – 60 Hz, 75W |
| AC Connector | 3-Pin IEC 250 VAC, 10 A male |
| Power Supply Type | Switchmode |
| Safety Features | |
| Input Protection | Peak and RMS limiting, power supply and amplifier thermal protection |
| Display LEDs | Voicing Mode, Outdoor Mode, Music Ducking, Feedback Eliminator, Front LED, Bluetooth Status, Link Status, Overload, Battery Level |
| Battery Information | |
| Battery Type | Lithium Ion |
| Battery Life | Up to 12 hours |
| Charge Time | 3 hours (no signal) 4 hours (with signal) |
| Construction Features | |
| Basic Design | Asymmetrical |
| Enclosure Material | Polypropylene |
| Enclosure Finish | Black, textured finish |
| Grille Material | Perforated metal w/weather-resistant coating |
| Grille Finish | Powder-coated black |
| Handles | One |
| Operating Temperature | 0 – 40 °C // 32 – 104 °F |
| Mounting Methods | |
| Supported Methods | Floor mount or pole mount via the built-in socket on the bottom of the cabinet [Be sure the pole is capable of supporting the weight of the Thump GO]. They are NOT designed to be suspended. The cabinet has no rigging points and is not suitable for rigging. Never attempt to suspend a Thump GO by its handle. |
| Physical Properties (product) | |
| Height | 18.0 in / 457 mm |
| Width | 9.1 in / 230 mm |
| Depth | 11.2 in / 285 mm |
| Weight | 17.6 lb / 8.0 kg |





















