SPECIFICATIONS
| Loudspeaker Technical Specifications | |
|---|---|
| Acoustic Performance | |
| Frequency Range (-10 dB) | 48 Hz – 20 kHz |
| Frequency Range (-3 dB) | 55 Hz – 20 kHz |
| Horizontal Coverage | 90° |
| Vertical Coverage | 60° |
| Maximum SPL Peak | 122 dB |
| Monitor Angle | 45° |
| Transducers | |
| Low Frequency | 8.0″ / 203 mm woofer with ferrite |
| High Frequency | 1.0″ / 25 mm titanium high frequency driver |
| Power Amplifiers | |
| System Power Amplification – Rated Power | 400 watts peak |
| Low Frequency Power Amplifier | Rated Power: 350 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| High Frequency Power Amplifier | Rated Power: 50 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| Input / Output | |
| Input Type | 2x Female XLR, 4x 1/4″ balanced jacks, 1/8″ Aux jack, Bluetooth, USB-C |
| Mic Impedance [Channels 1 + 3] | 4 kΩ balanced |
| Instrument Impedance [Channels 2 + 4] | 1 MΩ unbalanced |
| Line Input [Channel 5/6] | 10 kΩ balanced/unbalanced |
| Output Type | Male XLR Balanced [Mix Out], 1/4″ Stereo Headphones |
| Mix Out Impedance | 300 Ω balanced |
| FX Send Impedance | 300 Ω pseudo-balanced |
| Bluetooth and USB Information | |
| Bluetooth Protocol | 5.1 |
| Bluetooth Function | Audio Streaming |
| USB | 2×2, 3.1 ≥Gen1 |
| Electronic Crossover | |
| Crossover Type | 4th order Linkwitz-Riley set at 1.8 kHz |
| Crossover Frequency | 1.8 kHz |
| Equalization | |
| Low | ±15 dB @ 80 Hz |
| Mid | ±15 dB @ 2.5 kHz |
| High | ±15 dB @ 12 kHz |
| Digital Effects | |
| Number of Presets (FX1) | 12 |
| Number of Presets (FX2) | 16 |
| Line Input Power | |
| Detachable Line Cord | 100–240V~, 50–60Hz, 75W |
| Safety Features | |
| Input Protection | Peak and RMS limiting, power supply and amplifier thermal protection |
| Display LEDs | Front LEDs, Feedback Eliminator, Outdoor Mode, PA Mode, Bluetooth Status, Battery Level, Breakaway Mixer (Multiple) |
| Battery Information | |
| Battery Type | Lithium Ion |
| Battery Life | Up to 12 hours |
| Charge Time | 3 hours (no signal), 4 hours (with signal) |
| Capacity | 5200 mAh |
| Nominal Voltage | 14.8 V |
| Operating Temperature Range | 15 – 35 °C // 59 – 95 °F |
| Charging Temperature Range | 0 – 45 °C // 32 – 113 °F |
| Construction Features | |
| Basic Design | Asymmetrical |
| Enclosure Material | Polypropylene |
| Enclosure Finish | Black, textured finish |
| Grille Material | Perforated Metal w/weather-resistant coating |
| Grille Finish | Powder-coated black |
| Handles | One on top |
| Mounting Methods | |
| Supported Methods | Floor mount or pole mount via the built-in socket on the bottom of the cabinet [Be sure the pole is capable of supporting the weight of the ShowBox]. They are NOT designed to be suspended. The cabinet has no rigging points and is not suitable for rigging. Never attempt to suspend a ShowBox by its handle. |
| Physical Properties (product) | |
| Height | 19.7 in / 500 mm |
| Width | 11.8 in / 300 mm |
| Depth | 9.8 in / 249 mm |
| Weight | 20.9 lb / 9.5 kg |
