SPECIFICATIONS
| Loudspeaker Technical Specifications | |
|---|---|
| Acoustic Performance | |
| Frequency Response (-10 dB) | 45 Hz – 20 kHz [SRM210] 42 Hz – 20 kHz [SRM212] 40 Hz – 20 kHz [SRM215] |
| Frequency Response (-3 dB) | 55 Hz – 20 kHz [SRM210] 50 Hz – 20 kHz [SRM212] 44 Hz – 20 kHz [SRM215] |
| Horizontal Coverage | 90° |
| Vertical Coverage | 60° |
| Maximum SPL Peak | 131 dB [SRM210] 135 dB [SRM212] 136 dB [SRM215] |
| Monitor Angle | 45° |
| Transducers | |
| Low Frequency | 10 in / 254 mm [SRM210] 12 in / 305 mm [SRM212] 15 in / 381 mm [SRM215] with ferrite |
| High Frequency | 1.4 in / 36 mm polymer compression driver |
| Power Amplifiers | |
| System Power Amplification – Rated Power | 2000 watts peak |
| Low Frequency Power Amplifier |
Rated Power: 1800 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| High Frequency Power Amplifier |
Rated Power: 200 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| System Processing | |
| Voicing | 10 speaker modes [5 inside, 5 outside] |
| Subwoofer HPF | Off, DRM18S, Var |
| Input EQ | 3-band |
| Delay | 0 – 100 ms |
| Equalization | |
| Low | ±12 dB @ 80 Hz |
| Mid | ±12 dB @ 2.5 kHz |
| High | ±12 dB @ 5 kHz |
| HPF | 20 Hz – 150 Hz (Var) |
| Input / Output | |
| Input Type |
2x Female XLR Balanced 1/4″ Balanced 1/8″ Stereo |
| Mic-Line Impedance | 20 kΩ balanced |
| 1/4″ Hi-Z Impedance | 100 kΩ balanced |
| Direct Out and Mix Out | Male XLR Balanced |
| Mix Out Impedance | 300 Ω balanced |
| Main Control | Rotating Knob |
| Bluetooth Information | |
| Bluetooth Protocol | 4.2 |
| Bluetooth Function | Audio Streaming and User Interface Control |
| Bluetooth Class | Class 1 |
| Electronic Crossover | |
| Crossover Type | 24 dB / octave |
| Crossover Frequency | 2.0 kHz |
| Line Input Power | |
| Detachable line cord |
~100 – 240 VAC, 50 – 60 Hz, 110W ~220 – 240 VAC, 50 – 60 Hz, 110W |
| AC Connector | 3-Pin IEC 250 VAC, 10 A male |
| Power Supply Type | Switchmode |
| Safety Features | |
| Input Protection | Peak and RMS limiting, power supply and amplifier thermal protection, overcurrent, over-voltage, dynamic thermal protections and forced air-cooling |
| Display LEDs | Defeatable front power, speaker control |
| Status Info | Input and output levels, voicing mode, sub HPF, EQ and delay settings |
| Construction Features | |
| Basic Design | Asymmetrical |
| Enclosure Material | Black Polypropylene |
| Enclosure Finish | Light Black Texture |
| Grille Material | 16-18 gauge perforated steel w/nylon net backing |
| Grille Finish | Powder-coated black |
| Handles | One [SRM210], two on each side and one partial on top [SRM212 and SRM215] |
| Display LEDs |
Front: Power / Signal Rear: Speaker Control |
| Operating Temperature | 0 – 40 °C // 32 – 104 °F |
| Physical Properties (product) | |
| SRM210 | V-Class |
Height: 23.0 in / 584 mm Width: 15.1 in / 384 mm Depth: 12.9 in / 328 mm Weight: 30.9 lb / 14.0 kg |
| SRM212 | V-Class |
Height: 25.9 in / 658 mm Width: 15.2 in / 386 mm Depth: 14.2 in / 361 mm Weight: 40.6 lb / 18.4 kg |
| SRM215 | V-Class |
Height: 28.8 in / 732 mm Width: 17.6 in / 447 mm Depth: 15.4 in / 391 mm Weight: 48.9 lb / 22.2 kg |


















