SPECIFICATIONS
| Loudspeaker Technical Specifications | |
|---|---|
| Acoustic Performance | |
| Frequency Response (-10 dB) | 33 Hz – 200 Hz [Deep HPM] 35 Hz – 200 Hz [Flat HPM] 38 Hz – 200 Hz [Punch HPM] |
| Frequency Response (-3 dB) | 35 Hz – 160 Hz [Deep HPM] 41 Hz – 160 Hz [Flat HPM] 46 Hz – 160 Hz [Punch HPM] |
| Maximum SPL Peak | 133 dB |
| Transducers | |
| Low Frequency | 18 in / 457 mm woofer with ferrite |
| Power Amplifiers | |
| System Power Amplification – Rated Power | 1600 watts peak |
| Low Frequency Power Amplifier | Rated Power: 1600 watts peak Rated THD: <1% Cooling: Convection Design: Class D |
| System Processing | |
| Phase | Normal / Invert |
| High Pass Mode | SR Flat, SR Deep, SR Punch, Variable |
| Input / Output | |
| Input Type | 2x Female XLR Balanced Differential (Stereo Left / Right) |
| Input Impedance | 20 kΩ Balanced, 10 kΩ Unbalanced |
| Full Range Outputs | 2x Male XLR Balanced (Parallel with Inputs – Mono) |
| Full Range Impedance | 300 Ω Balanced |
| High Pass Outputs | 2x Male XLR Balanced |
| High Pass Impedance | 300 Ω Balanced |
| Main Level Control | Rotating Knob |
| Line Input Power | |
| Detachable line cord | ~100 – 240 VAC, 50 – 60 Hz, 110W |
| AC Connector | 3-Pin IEC 250 VAC, 10 A male |
| Power Supply Type | Switchmode |
| Safety Features | |
| Input Protection | Peak and RMS limiting, power supply and amplifier thermal protection |
| Display LEDs | Defeatable front power |
| Construction Features | |
| Basic Design | Rectangular |
| Enclosure Material | 15mm poplar plywood |
| Enclosure Finish | Black Polyurethane |
| Grille Material | 11 gauge ASTM A36 Steel |
| Grille Finish | Powder-coated black |
| Handles | One on each side |
| Display LEDs | Front: Power ON Rear: High Pass Mode, Sig / Clip |
| Operating Temperature | 0 – 40 °C // 32 – 104 °F |
| Options | |
| SR18S Subwoofer Cover | P/N 2036809-60 |
| SPM400 Loudspeaker Pole Mount | P/N 2051055 |
| Mounting Methods | |
| Supported Methods | SR18S subwoofers are designed to sit on the floor or stage. They are NOT designed to be pole-mounted or suspended. The cabinet has no rigging points and is not suitable for rigging. Never attempt to suspend an SR18S subwoofer by its handles. |
| Physical Properties (product) | |
| Height | 23.3 in / 592 mm |
| Width | 23.0 in / 584 mm |
| Depth | 27.0 in / 686 mm |
| Weight | 74.5 lb / 33.8 kg |











