Source
• Light source type:
72 × 20W White strobe LEDs
116 x 10W WarmWhite + 88 x 5W Amber audience blinder LEDs
16 × 60W RGBW wash LED multichips
• LED life expectancy: min. 40 000 hours
• Typical lumen maintenance: 70% @ 40 000 hours
Optical system
• Highly efficient component optics
• Zoom range :
White LED strobe: 98° x 14° – 125° x 97°
RGBW LED wash: 13° – 95°
• Fixture total lumen output:
White LED strobe:
– 168.000 lm (integrated sphere)
– 134.400 lm (goniophotometer)
WW+A LED blinder:
– 147.000 lm (integrated sphere)
– 117.600 lm (goniophotometer)
RGBW LED Wash:
– 24.250 lm (integrated sphere)
– 19.400 lm (goniophotometer)
• Hyper-Z™ linear zoom encompasses linear versatility not previously possible
Dynamic Effects and Features
• Colour mixing mode RGBW or CMY
• Zoom control:
2x RGBW LEDs zones: 8 + 8 pixels
1x White LED zone: 12 pixels
• White light:
RGBW zones: Variable CCT 2.700K – 10.000K
White zone: Variable 1.800K – 3.200K and fixed 6500K
• + – Green correction function
• DataSwatch™ filters: pre-programmed 66 colours and tones including most used whites 2.700K, 3.200K, 4.200K, 5.600K and 8.000K
• Tungsten lamp effect: 750W, 1.000W, 1.200W, 2.000W, 2.500W lamp emulation for whites from 1.800K to 3.200K (red shift and thermal delay)
• Strobe duration: 13 – 860 ms
• Strobe rate: 0,3 – 30 Hz
• Strobe effect: Ramp up, ramp down, ramp up-down, random flash, single flash, Lighting, Spikes, Double flash, Tripple flash, Quad Flash, Burst flash Rnd
• Individual zone strobe effect with variable speed
• L3™ – (Low Light Linearity) Imperceptible 18 bit dimming for ultra smooth fade to black
• Cpulse™ special flicker-free management for HD and UHD cameras, ready for 8K and 16K
• AirLOC™ (Less Optical Cleaning) technology greatly reduces the level of airborne particles drawn over the optical elements. This increases the overall performance, light quality and time between routine cleaning and maintenance.
• POLAR+™ for power saving and instant operation in extremely cold weather conditions
• Pre-programmed show & visual effects: (synchronized for multiple fixtures) police, fire, flashlights, sunset, sunrise
• UpLift™: To ease handling, clip on UpLift handles are designed to ease the burden. Handles are easily attached and removed, greatly easing carrying and lifting of larger fixtures.
Control and programming
• Setting & Addressing: ROBE Navigation System 3 (RNS3)
• Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding, NFC app controller
• Protocols: USITT DMX-512, RDMArtNet, MA Net, MA Net2, sACN, Kling-Net
• REAP™ – Robe Ethernet Access Portal
• RAINS™ (Robe Automatic Ingress Neutralization System) manages humidity, temperature and pressure control using an active monitoring system to automatically remove any moisture detected within the fixture and provides constant monitoring to ensure peak performance
• Wireless CRMX™ technology from Lumen Radio
• Epass™: Ethernet pass through switch which sustains Ethernet integrity, when the fixture has no power, to automatically maintain network connectivity
• DMX Protocol modes: 5
• Control channels: 32, 44, 64, 106, 140
Electrical specification and connections
• Power supply: Electronic auto-ranging
• Input voltage range: 100-240 V, 50/60 Hz
• Power consumption: Max. 1400W
• Power connector in: IP65 Neutrik powerCON TRUE1
• DMX and RDM data in/out: IP65 Locking 3-pin & 5-pin XLR connectors
• Ethernet port in/out: IP65 RJ45, for Embedded Epass™ switch 10/100 Mbps
