Specifications
| ACOUSTICAL | |
| Compatible Models | ULTRA-X40 / ULTRA-X42 |
| Operating Frequency Range2 | 55 Hz – 19.5 kHz |
| Frequency Response3 | [ULTRA-X40]: 56 Hz – 19 kHz ± 4 dB [ULTRA-X42]: 58 Hz – 18 kHz ± 4 dB |
| Phase Response | 90 Hz – 19.5 kHz ±45° |
| Maximum SPL / Linear Peak SPL | [ULTRA-X40]: 138 dB Max SPL (Linear Peak: 132.5 dB with 18 dB crest factor [M-noise], 130 dB [Pink], 131 dB [B-noise]) [ULTRA-X42]: 140 dB Max SPL (Linear Peak: 134 dB with 18.5 dB crest factor [M-noise], 132 dB [Pink], 134 dB [B-noise]) |
| COVERAGE | |
| Horizontal x Vertical | [ULTRA-X40]: Rotatable horn: 110° x 50° [ULTRA-X42]: Rotatable horn: 70° x 50° |
| TRANSDUCERS | |
| Low Frequency | Two 8-inch cone drivers; 4 Ω nominal impedance |
| High Frequency | One 3-inch diaphragm compression driver connected to a rotatable horn; 8 Ω nominal impedance |
| AUDIO INPUTS | |
| Type & Impedance | • Type: Differential, electronically balanced (Max Common Mode: ±15 V DC) • Input Impedance: 10 kΩ differential between pins 2 and 3 |
| Connectors | XLR 3-pin female input with male loop output; optional XLR 5-pin connector to accommodate both balanced audio and RMS signals |
| Wiring Layout (5-Pin)6 | Pin 1: Chassis/earth (via 1 kΩ, 1000 pF, 15 V clamp network) Pin 2: Signal + / Pin 3: Signal – Pin 4: RMS / Pin 5: RMS (polarity insensitive) Case: Earth ground and chassis |
| Sensitivity & Input Level | • Nominal Sensitivity: 0 dBV (1.0 V rms) continuous (onset of limiting) • Max Input Level: +20 dBV (10 V rms) into 600 Ω |
| AMPLIFIER | |
| Type & Power7 | Three-channel, Class-D / 1,950 W peak output power |
| Distortion & Cooling | THD, IM, TIM <0.02% / Convection cooling |
| AC POWER | |
| AC Connector & Voltage | • Connector: powerCON 20 input with loop output • Automatic Voltage Selection: 90–265 V AC, 50–60 Hz • Safety Rated Range: 100–240 V AC, 50–60 Hz |
| Turn-on / Off Points | 90 V AC turn-on, no turn-off; internal fuse protection above 265 V AC |
| CURRENT DRAW | |
| Idle & Continuous Current | • Idle Current: 0.27 A rms (115 V), 0.25 A rms (230 V), 0.29 A rms (100 V) • Max Long-Term Continuous (>10 sec): 1.9 A rms (115 V), 1.0 A rms (230 V), 2.2 A rms (100 V) |
| Burst & Peak Current | • Burst Current (<1 sec)8: 3.1 A rms (115 V), 1.5 A rms (230 V), 3.4 A rms (100 V) • Max Instantaneous Peak: 6.9 A peak (115 V), 3.4 A peak (230 V), 7.9 A peak (100 V) |
| Inrush Current | <20 A peak |
| RMS NETWORK (OPTIONAL) | |
| Remote Monitoring | Two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer |
| PHYSICAL | |
| Dimensions | W: 12.51 in (318 mm) x H: 22.31 in (567 mm) x D: 14 in (356 mm) (D with handles: 15.38 in / 391 mm) |
| Weight | 52 lb (23.6 kg) |
| Enclosure & Grille | Premium multi-ply birch with slightly textured black finish; Powder-coated, round-perforated steel grille |
| Rigging / Mounting | 11 integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional accessories available for various rigging options |



